What are the common faults and maintenance methods of vacuum oil filter?

Vacuum oil filter is a set of vacuum drying, separation engineering technology, coagulation technology, adsorption technology and precision 

filtration technology in one of the equipment. In the state of high vacuum, it can quickly and reliably remove the water, gas, impurities, gum, 

sludge and various pigments in the oil, and reduce the dielectric loss and acid value, improve the degree of emulsification, and improve the 

quality of oil.

Vacuum oil filter can meet higher and faster optimization requirements, and plays a very important role in purifying the entire oil system. Next, 

introduce the common faults and maintenance methods of vacuum oil filter:

Vacuum degree does not meet the technical standard how to solve?There is too much water in the filtered oil and too much water vapor in the gas discharged by the vacuum pump, which is a normal 

phenomenon and requires multiple filtration;

Due to the different altitude of the use site, the vacuum degree change is not affected in the case of standard atmospheric pressure, 

usually the oil temperature should be increased to evaporate water;

The vacuum oil level in the vacuum pump is low, and the vacuum pump should be increased;

Due to the long use time, the vacuum oil needs to be replaced when the water content increases;

Seal leakage at each connection, need to check and repair;

The wearing parts of the vacuum pump wear out, should be checked and replaced.