In the oil dewatering system, after the oil flows into the coalescing separator, it first flows through the coalescing filter element. The coalescing filter element filters out solid impurities and coalesces very small water droplets into larger droplets. Most of the coalesced water droplets can be separated from the oil by its own weight and settled in the sump.
Then the oil product flows through the separation filter element. Since the separation filter element has good lipophilic and hydrophobic properties, the water is further separated, and the clean and water-free oil product flows out of the coalescing separator.
When the filter medium flows into the coalescing filter element, the impurity removal layer of the coalescing filter element performs high-precision filtration of the medium with a thickness of 1~25μm, and then enters the coalescing layer.
The coalescing layer expands and coalesces the water molecules in the medium to form larger water droplets, which fall off with gravity, and some of the water droplets further flow to the filter outlet due to the influence of the flow rate. At this time, an oil-water separation filter element is needed for separation and dehydration. .
The separation filter element is made of Teflon hydrophobic material after special processing. When the oil passes through the separation filter element, the water drops are blocked on the outside of the separation filter element, and the oil can pass through and be discharged from the outlet.
Filter number:
I-61185
I-61187
I-61485
I-61487
I-62285
I-62287
I-62885
I-62887
I-63385
I-63387
I-63885
I-63887
I-64485
I-64487
I-65685
I-65687
I-61485-TB
I-61487-TB
I-62285-TB
I-62287-TB
I-62885-TB
I-62887-TB
I-63385-TB
I-63387-TB
I-63885-TB
I-63887-TB
I-64485-TB
I-64487-TB
I-65685-TB
I-65687-TB
SO-318C
SO-623C
SO-629C
SO-436V
SO-633VA
SO-640V
SO-644V
SO-630PV
SO-630PV
SO-636PV
SO-640PV
SO-630PV
SO-630PV
SO-640PV
SO-644PV
SO-636PV
SO-636PV
SO-644V
SO-644PV
SO-616
SO-614C5
So-623-C